Home > Building Products > Metal Roofing Products > Tile Roofing > Multi-Tile SiteMap  
  Thursday, November 26, 2020   

The latest and most advanced technology has created the Multi-Tile Roofing System that supersedes all other conventional roofing. It feaures a distinctive deep tile profile that will enhance the appearance of both new and existing homes while providing the classic look of concrete tiles and yet stronger.
Patented Folding Process A patented folding process with no reduction in metal thickness and henace no weakening of the metal.
Multiple Variable Step Module Size (Distance Between Steps) can be varied between 80mm to 450mm in a single sheet to suit any new design and existing roofs.
Variable End Cut A variable end cut can be provided where a fixed module size is required to suit the design to eliminate the need to trim the roofing sheet at the ridge.
Double-Pitch/Multiple Pitch Flexibitity Multi-Tile is the only system that gives you double-pitch/multiple-pitch roofing versatility without joints or flashings.
Watertight Single rib profile on the sidelap provides full protection against water seepage and weather.
Low Pitch Minimum Pitch of 7.5

Base Metal High Quality Steel conforming to AS1397:1993 with Zn/ZnAI coating of AZ150/Z275.
Thickness 0.48mm TCT Unless Otherwise Specified
Coating Finish Available in a wide range of colours using MULTICOTE G6, G7 or G8 finish (complying to AS/NZS 2728)
Coverage Effective coverage of 765mm..
Length Cut to length in module sizes between 80mm to 450mm. Length of each sheet limited only by handling facilities but recommended max length is 7m.
Accessories Full range of colour-matching accessories are available

Products available:   

About Us |  Contact Us |  Join Us |  Site Search |  Sitemap

Updated since August, 2008
Copyright Multi Resources Holdings Sdn. Bhd. 2008 All Rights Reserved